Lavor Dynamic 45B Floor Scrubber

Lavor Dynamic 45B Floor Scrubber

General Overview and Key Features

The Dynamic 45B is a compact scrubber designed for fast, uniform, and safe floor cleaning in high-traffic indoor areas. With a theoretical capacity of 1600 m²/hour, a 24 V battery system, a 450 mm brush width, and a 540 mm vacuum width, it delivers standardized results across medium and large spaces. The 35-liter clean water and 35-liter dirty water tanks support long, uninterrupted operation. Its 97 kg body weight applies ideal pressure to the floor, increasing brush effectiveness and providing a streak-free, low-slip finish.

Technical Performance and Equipment

Brush System and Mechanical Action

The 140 rpm brush loosens dirt layers on the surface, while the 150 rpm / 18 kg pressure parameter provides effective mechanical abrasion even on localized dirt. The 450 mm cleaning width allows large areas to be completed efficiently when used with an overlapping-line technique.

Vacuum Path and Quick Drying

The 540 mm vacuum width and 400 W vacuum motor collect detergent water in a single pass. This ensures that foot traffic can safely resume immediately after cleaning.

Battery Power and Continuity

The 24 V battery system eliminates cable limitations, allowing uninterrupted maneuvering in narrow corridors, crowded aisles, and around furniture. The 400 W brush motor and balanced drive system deliver consistent performance even during long shifts.

Ergonomics and Body Balance

With dimensions of 117 × 58 × 78 cm, the machine is easy to use in tight spaces such as doorways and elevators. Weight distribution helps the operator control the machine with minimal effort, reducing vibration and increasing comfort.

Usage Method and Recommendations

Preparation Stage

Fill the clean water tank with detergent solution prepared according to manufacturer instructions. Check the wear condition of the brush, vacuum squeegees, and wipers. Sweep large debris from the floor before washing. Ensure the battery has sufficient charge for the required task.

Cleaning Application

Start the machine, lower the brush to the floor, and activate the wash-vacuum mode. Move in straight lines at a steady pace, overlapping each pass by 30–40% to avoid missed areas. Reduce speed in heavily soiled sections to increase contact time. In corners and along edges, ensure the vacuum squeegee maintains full contact with the floor.

Rinsing and Shutdown

At the end of the process, make a final pass to remove all remaining moisture. Empty the dirty water tank and rinse the tank, hose, and vacuum channels with clean water. Remove, wash, and dry the brush and squeegees separately. Connect the battery to the charging station to begin a full charge cycle.

Maintenance and Safety

Clean filters and water channels regularly. Replace worn vacuum squeegees promptly to prevent streaking. Do not leave chemical residues inside the tanks or lines. Store the machine on a dry, flat surface when not in use.

Application Areas

The Dynamic 45B provides standardized floor hygiene in high-traffic environments such as shopping mall corridors, school and hospital blocks, hotel common areas, sports facilities, production and warehouse floors, administrative buildings, and supermarkets. Its compact design ensures easy control even in crowded or obstructed areas.

The Dynamic 45B Floor Scrubber offers 1600 m²/hour capacity, a 24 V battery system, a 450 mm brush width, and a 540 mm vacuum width for high efficiency, fast drying, and repeatable quality. With proper detergent matching, overlapping line technique, and regular maintenance, it preserves the same performance for many years.