Lavor Dynamic 45E Floor Scrubber

Lavor Dynamic 45E Floor Scrubber

General Overview and Key Features

The Dynamic 45E Floor Scrubber is the corded alternative to the battery-powered Dynamic 45B. Operating on 230 V power, it enables uninterrupted cleaning without the need for charging. With a theoretical cleaning capacity of 1600 m²/hour, a 450 mm brush width, and a 540 mm vacuum width, it delivers maximum efficiency on medium-sized floors. Its 35-liter clean water and 35-liter dirty water tanks support long cleaning cycles, while the 400 W brush motor and 400 W vacuum motor provide balanced and consistent performance. The 65 kg body weight applies optimal pressure to the surface, ensuring deep cleaning. With dimensions of 117 × 58 × 78 cm, the machine offers easy maneuverability even in narrow areas.

Technical Performance and Equipment

Continuous Power and Stable Performance

Thanks to its corded design, the Dynamic 45E can operate through long shifts without being limited by battery duration. The 230 V / 50 Hz motor maintains consistent torque, providing continuous brush power and stable cleaning performance without loss.

Brush and Vacuum Performance

The 150 rpm brush speed and 18 kg brush pressure effectively remove dirt and grease layers. The 400 W vacuum motor combined with a 540 mm vacuum width strongly extracts remaining moisture; the floor dries quickly and slip risk is eliminated.

Durable Body and Balanced Design

The 65 kg body provides optimal downward pressure, supporting efficient brush action. The compact body helps the operator guide the machine with minimal effort. With its wheeled balance system, it is easy to use in narrow corridors, office passages, and store aisles.

Usage Method and Recommendations

Preparation Stage

Fill the clean water tank with a detergent mixture as recommended. Ensure the electrical connection is safe and grounded. Plan the cable route and place safety warnings in crowded areas. Check the condition of the brush and squeegee blades.

Cleaning Application

Start the machine, lower the brush onto the floor, and monitor cable direction as you move in straight lines at steady speed. Apply approximately 30% overlap on each pass to ensure full coverage. In heavily soiled areas, reduce speed to increase brushing effect.

Rinsing and Shutdown

After cleaning, stop the machine and vacuum any remaining water. Empty the dirty water tank and rinse the tank and hoses with clean water. Remove, wash, and dry the brush and squeegee. Coil the cable neatly and hang it properly, then store the machine in upright position.

Maintenance and Safety

Check the filter and vacuum line after each use. Replace the power cable if there is any wear or deformation. Do not leave water inside the tank; prolonged chemical residue may damage the pump system. Store the machine in a dry and level environment.

Application Areas

The Dynamic 45E is suitable for high-frequency cleaning in hotels, schools, supermarkets, public buildings, hospitals, administrative offices, and factory floors. Its corded power supply allows continuous performance throughout long shifts. It is an ideal solution for smooth floors requiring consistent maintenance. With a 1600 m²/hour capacity, a 230 V power structure, a 450 mm brush width, and a 540 mm vacuum path, the Dynamic 45E Floor Scrubber delivers uninterrupted professional cleaning. Its 35-liter tank capacity, quiet operation, and durable body make it an efficient, economical, and long-lasting solution for medium-sized facilities.

Lavor Dynamic 45E Floor Scrubber – 1600 m²/h, 230 V, 450 mm Brush

Lavor Dynamic 45E: With its 230 V corded system, 1600 m²/hour capacity, 450 mm brush, and 540 mm vacuum width, it provides uninterrupted professional floor cleaning.